CP-M High Performance Compact
Wall-Hung Condensing Boilers
|
|
MORE
- High Efficiency – ETL listed
- Boiler/System Control Options
- Flexible Flue Arrangements
- 6 Models – outputs from 60 to 180Kw
LESS
- Low Carbon Emissions
- Fuel running cost savings
- Lower Installation costs
- Less Space required
|
|
|
|
The CP-M boiler works in much the same way as a standard fan-flued boiler does
except that it has a larger heat exchanger, made of stainless steel, which
absorbs more heat from the burner and the flue gasses. Given the right
conditions (Return water cool enough to cool the gasses below 54°C) the flue
gasses condense and release latent heat back into the boiler, this would
otherwise be wasted. The flue gasses from standard boilers are generally above
300°C, on the CP-M boiler they can be as low as 50°C for the majority of
operation, so the potential for fuel savings and lower carbon emissions are
obvious.
All boilers are less efficient when oversized and output should be carefully
matched to demand. The CP-M has a pre-mix, class 5 low NOx, fully modulating
burner that will mirror the design requirements of the system and turn down to
the exact output needed. This helps to ensure that the boiler is a perfect
companion to the heating system.
The CP-M has a larger heat exchanger than a standard boiler and therefore it
will always be more efficient even when not condensing. Radiators can be
oversized to make the boiler condense more often but this is not generally cost
effective and they should be sized as for a conventional boiler. The key to
maximising the potential of the CP-M is in the effectiveness of the "on board"
controls system.
|
Weather Compensation
All CP-M boilers have a built in weather compensation device and a cascade
management system.
The weather compensator adjusts the demand for heat in response to the outside
temperature. This enables the boiler to modulate and run at lower temperatures,
allowing the boiler to operate in condensing mode for as long as possible.
In order to operate the weather compensation device, an external temperature
sensor is required. This is available as an Ancillary Option.
Cascade Management
A system load of up to 1304 kW can be shared between up to 8 CP-M boilers. This
ensures that the system requirements are matched exactly with the added
advantage of optimum efficiency of the burners. It also provides "back-up"
protection should one of the units be out of operation for any maintenance
purposes. The cascade management can also be controlled externally through an
in-built 0-10 VDC connection on the boiler panel.
|
|
Controls
The CP-M controls can also be interrogated by a laptop computer to give
performance data revealing the operation of the boiler from the moment that it
is powered up. This gives assurances that the boiler is set to cope with the
system requirements and allows any necessary running adjustments to be made in
order to further "trim" the controls.
|
|
Flue Options
CP-M Boilers are built with a concentric spigot as standard. An option for twin
pipe (flue & air ducts) is available for long flue runs.
|
|
|
Product Information
PDF Downloads
CAD Downloads
| Model |
Download CAD Drawing
|
View CAD Drawing
|
| CP-M 60 |
|
|
| CP-M 80 |
|
|
| CP-M 100 |
|
|
| CP-M 120 |
|
|
| CP-M 150 |
|
|
| CP-M 180 |
|
|
| |
|
|
| All of the CP-M Series CAD drawings in one zip file. |
|
n/a
|
|